Fiber Termination Box-Page 5-Carefiber Optical,Best Fiber Optic Cable & Fiber Optic Cable Manufacturers

2 IN 2 OUT Preconnected Fiber Optic Distribution Box For FTTX Network

2024-10-14

2 IN 2 OUT Preconnected Fiber Optic Distribution Box For FTTX Network The equipment is used as a termination point for the feeder cable to connect with the drop cable in the FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile, it provides solid protection and management for the FTTx network building. This Fiber Optic Distribution Box is designed with wide compatibility for fiber optic cables, including SC, LC, ST, and MPO connector types. It is built with a rugged IP68-rated protection level and can be easily installed wall-mounted. Besides, this termination box is available in white color. 2 IN 2 OUT Preconnected Fiber Optic Distribution Box For FTTX Network Features: Material: PC+ABS,wet-proof、water-proof、dust-proof、anti-aging, protection level up to IP68. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one. Cable, pigtails, and patch cords run through their paths without disturbing each other, micro type PLC splitter installation, easy maintenance. The distribution panel can be flipped up, and the feeder cable can be placed in a cup-joint way,...

18 Ports Pre-Connected Fiber Optic Distribution Box With Waterproof Adapter

2024-10-14

18 Ports Pre-Connected Fiber Optic Distribution Box With Waterproof Adapter Fiber Optic Distribution Box is an integrated and reliable termination box for all fiber optic cables. It is the ideal solution for fiber optic cable management, and it's widely used in FTTH, FTTx, Telecommunication, CATV, and other fiber cabling projects. This Fiber Optic Distribution Box is designed with wide compatibility for fiber optic cables, including SC, LC, ST, and MPO connector types. It is built with a rugged IP68-rated protection level and can be easily installed wall-mounted. Besides, this termination box is available in white color. 18 Ports Pre-Connected Fiber Optic Distribution Box With Waterproof Adapter Features: Apply to wall-mounted Hold-up installation. High-strength material with good weather adaptability and UV resistance. Port into the end and leakage design, no need to open the box, easy construction. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use. Different color adapters are supported to distinguish the box channels. Water-proof, dust-proof, anti-aging, protection level up to IP68. 18 Ports Pre-Connected Fiber Optic Distribution Box With...

White 16 Ports Fiber Optic Termination Box With Waterproof Adapter

2024-10-14

White 16 Ports Fiber Optic Termination Box With Waterproof Adapter This fiber can connect the drop cable with the feeder cable as the termination point in the Fttx network, which can meet at least 16 users' requirements. It can help with splicing, splitting, storage, and management with suitable space. White 16 Ports Fiber Optic Termination Box With Waterproof Adapter Features: The body is made of high-quality engineering plastic with good strength; With a safe special-shaped lock, the box can be opened easily and has good waterproof performance, suitable for indoor and outdoor natural environments (Pic#1 for details); With a water-proof adapter, the box can be operated more conveniently ; With a double-page design, the box can be installed and maintained easily, the fusion and termination are completely separated ( Pic#3 for details); The BOX can be installed with 2 pcs of 1*8 tube splitter or 1 pcs of 1*16 tube splitter White 16 Ports Fiber Optic Termination Box With Waterproof Adapter Applications : FTTH Application; Fiber optic communications in harsh outdoor environments; Outdoor communication equipment connection; Waterproof fiber equipment SC port;...

8 Cores Fiber Optical Distribution Box With Waterproof Connector

2024-10-14

8 Cores Fiber Optical Distribution Box With Waterproof Connector This fiber access termination box（FDB） type can hold up to 8 subscribers. It is used as a termination point for the feeder cable to connect with the drop cable in the FTTx network system. It integrates fiber splicing, splitting, distribution, storage, and cable connections in one solid protection box. 8 Cores Fiber Optical Distribution Box With Waterproof Connector Features: Outdoor application, good UV resistance. Excellent waterproof performance Suitable for wall mount and vertical pole. Various applications such as midspan, branching, and direct stitching Different isolation plates support micro-separator with adapter High-strength material with good weather adaptability. Excellent sealing performance, compatible with different optical cables. 8 Cores Fiber Optical Distribution Box With Waterproof Connector Applications : FTTH Application; Fiber optic communications in harsh outdoor environments; Outdoor communication equipment connection; Waterproof fiber equipment SC port; Remote wireless base station; FTTx FTTA wiring project. 8 Cores Fiber Optical Distribution Box With Waterproof Connector Configuration: Item Specification Size（mm） 290*210*82 Material PC+ABS Protection Level IP66 Max Capacity Splitter 1x8：1pcs Pigtail 8pcs Inlet Cable Size 12-16mm Inlet...

IP65 Optical Distribution Frames 48 Ports Wall Lock Box For FTTH Access Network

2024-10-14

IP65 Optical Distribution Frames 48 Ports Wall Lock Box For FTTH Access Network This type fiber access termination box（FDB） can hold up to 48 subscribers. It is used as a termination point for the feeder cable to connect with the drop cable in the FTTx network system. It integrates fiber splicing, splitting, distribution, storage, and cable connections in one solid protection box. FTTH Fiber Optic Distribution Box 16 Ports ABS Material Cable Termination Box Features: Outdoor application and good UV resistance. Apply to wall-mounted， Numerous applications such as mid-span, branch and direct splice Different splitter panels support micro splitter with adapter Adapter slots used – No screws and tools needed for installing adapters. Space-saving Double-layer design for easier installation and maintenance. High-strength material with good weather adaptability. Excellent sealing performance, It is compatible with different optical cables. FTTH Fiber Optic Distribution Box 16 Ports ABS Material Cable Termination Box Applications : Optical LAN & WAN & CATV FTTH project & FTTX Deployments Broadband High-bit rate data transmission Active device terminations Testing instruments Optical fiber communication networks PON Networks Optical Signal...

FTTH Fiber Optic Distribution Box 16 Ports ABS Material Cable Termination Box

2024-10-14

FTTH Fiber Optic Distribution Box 16 Ports ABS Material Cable Termination Box The Fiber distribution box can hold up to 16 subscribers. This box is used as a termination point for the feeder cable to connect with the drop cable in the FTTX communication network system. It integrates fiber splicing, splitting, distribution, storage, and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. FTTH Fiber Optic Distribution Box 16 Ports ABS Material Cable Termination Box Features: Material: PC+ABS,wet-proof、water-proof、dust-proof、anti-aging. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc. Cable, pigtails, and patch cords run through their paths without disturbing each other, micro type PLC splitter installation, easy maintenance. The distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation. Prefabricated end waterproof interface for fast connection wiring. Installation method: pole-mounted, aerial-mounted, wall-mounted. Supports the connection of the cable when it is longitudinally peeled and not cut. Lock provided for extra security. Protection level up to IP65. FTTH Fiber Optic Distribution...

Fiber Optic Distribution Box 8 Ports ABS FTTH Termination Box

2024-10-14

Fiber Optic Distribution Box 8 Ports ABS FTTH Termination Box The ODU box is designed to connect optical fiber to the pigtail and provides full splice and perfect fiber management. The box is used indoors or in the cabinet. Fiber Optic Distribution Box 8 Ports ABS FTTH Termination Box Features: Water-proof design with IP-65 Protection level. Made of Brand new plastic LSZH. There is a special window for drop cable access, no need to open the whole box. Clear fiber function area division and clear fiber routing. Special slot for micro splitter 1:8 in the splice tray. The splice tray can hold 120 degrees when wall-mounted and full load. Adaptor holders can be lifted a little and make the installation easy. The storage tray can be held at 90 degrees. Fiber Optic Distribution Box 8 Ports ABS FTTH Termination Box Applications : Optical LAN & WAN & CATV FTTH project & FTTX Deployments Broadband High-bit rate data transmission Active device terminations Testing instruments Optical fiber communication networks PON Networks Optical Signal Distribution Fiber Optic Distribution Box 8 Ports ABS FTTH...

8 Core Waterproof Fiber Optic Distribution Box With OptiTap Adapter

2024-10-12

8 Core Waterproof Fiber Optic Distribution Box With OptiTap Adapter Fiber access termination closure is able to hold up to 16 subscribers and 60 splicing points as closure. It is used as a splicing closure and a termination point for the feeder cable to connect with the drop cable in the FTTx network system. It integrates fiber splicing, splitting, distribution, storage, and cable connections in one solid protection box. 8 Core Waterproof Fiber Optic Distribution Box With OptiTap Adapter Features: Total enclosed structure. Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP67. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one. Cable, pigtails, and patch cords run through their own paths without disturbing each other, micro type PLC splitter installation, easy maintenance. The distribution panel can be flipped up, feeder cable can be placed by the expression port, easy for maintenance and installation. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use. 8 Core Waterproof Fiber Optic Distribution Box With OptiTap Adapter Applications...

Optical Fiber sub-Box 16-core Outdoor 1 sub-16 Optical Cable Distribution Box with Waterproof Adapter

2024-10-12

Optical Fiber sub-Box 16-core Outdoor 1 sub-16 Optical Cable Distribution Box with Waterproof Adapter Fiber access termination closure is able to hold up to 16 subscribers and 60 splicing points as closure. It is used as a splicing closure and a termination point for the feeder cable to connect with the drop cable in the FTTx network system. It integrates fiber splicing, splitting, distribution, storage, and cable connections in one solid protection box. Optical Fiber sub-Box 16-core Outdoor 1 sub-16 Optical Cable Distribution Box with Waterproof Adapter Features: Material: PP,wet-proof、water-proof、dust-proof、anti-aging. Impact test: IK10, Pull Force:100N, Full rugged design. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc. Cable, pigtails, and patch cords run through their paths without disturbing each other, Micro-type PLC splitter installation, is easy maintenance. The distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation. 16 ports cable entrance for drop cable and Max.24 adaptors for drop cable patching. 2 pcs of 1*8 Splitter can be installed as an option. Installation method: pole-mounted, aerial-mounted,...

192/288-core Optical Cable Splice Box Fiber Splice Box Cable Junction Box FTTH Distribution Box(192 core)

2024-10-12

192/288-core Optical Cable Splice Box Fiber Splice Box Cable Junction Box FTTH Distribution Box(192 core) The fiber optic splice closures (FOSC) are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. It is tested under harsh conditions and stands up to even the most severe conditions of moisture, vibration, and extreme temperatures 192/288-core Optical Cable Splice Box Fiber Splice Box Cable Junction Box FTTH Distribution Box(192 core) Features: The protection grade reaches IP 68. Ambient temperature ranges from -40 to 65℃. The closure is of small volume, big capacity, and convenient maintenance. The closure casing is made of quality engineering plastics and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure. The mechanical structure is reliable and has the performance to resist wild environment-intensive climate changes and serious working environments. Sealing Structure: Thermoplastic rubber Body Material: PP Assembling method: Pipelined, wall mounting, manhole 192/288-core Optical Cable Splice Box Fiber Splice Box Cable Junction Box FTTH Distribution Box(192 core)...

Outdoor Fiber Optic Termination Box 96 Core Wall Mounted Enclosure Box For FTTB

2024-10-12

Outdoor Fiber Optic Termination Box 96 Core Wall Mounted Enclosure Box For FTTB Fiber access termination closure can hold up to 16 subscribers and 96 splicing points as closure. It is used as a splicing closure and a termination point for the feeder cable to connect with drop cable in the FTTx network system. It integrates fiber splicing, splitting, distribution, storage, and cable connections in one solid protection box. Outdoor Fiber Optic Termination Box 96 Core Wall Mounted Enclosure Box For FTTB Features: Material: PP,wet-proof、water-proof、dust-proof、anti-aging, protection level up to IP68. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc in one. Cable, pigtails, and patch cords run through their paths without disturbing each other, micro type PLC splitter installation, easy maintenance. The distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation. Wall mounting and pole mounting installation. Supports the connection of the cable when it is longitudinally peeled and not cut. Outdoor Fiber Optic Termination Box 96 Core Wall Mounted Enclosure Box For FTTB Applications :...

Wall Pole Mounting Optical Fiber Distribution Box 16F PRE Connected

2024-10-12

Wall Pole Mounting Optical Fiber Distribution Box 16F PRE Connected The equipment is used as a termination point for the feeder cable to connect with the drop cable in the FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and it provides solid protection and management for the FTTx network building. Wall Pole Mounting Optical Fiber Distribution Box 16F PRE Connected Features: Material: PC+ABS, water-proof, dust-proof, anti-aging, protection level up to IP67. Clamping for feeder and drop cables, fiber splicing, fixation, storage, distribution...etc all in one. Cable, pigtails, and patch cords run through their paths without disturbing each other, micro type PLC splitter installation, easy maintenance. The distribution panel can be flipped up, feeder cable can be placed by the expression port, making it easy for maintenance and installation. Box can be installed by the way of wall-mounted 、poled-mounted or Overhead-mounted, suitable for both indoor and outdoor use. Wall Pole Mounting Optical Fiber Distribution Box 16F PRE Connected Applications : FTTH Application; Fiber optic communications in harsh outdoor environments; Outdoor communication equipment connection;...

Previous Page
1
···
3
4
5
6
7
Next Page
Total Pages: 8

2 IN 2 OUT Preconnected Fiber Optic Distribution Box For FTTX Network

18 Ports Pre-Connected Fiber Optic Distribution Box With Waterproof Adapter

White 16 Ports Fiber Optic Termination Box With Waterproof Adapter

8 Cores Fiber Optical Distribution Box With Waterproof Connector

IP65 Optical Distribution Frames 48 Ports Wall Lock Box For FTTH Access Network

FTTH Fiber Optic Distribution Box 16 Ports ABS Material Cable Termination Box

Fiber Optic Distribution Box 8 Ports ABS FTTH Termination Box

8 Core Waterproof Fiber Optic Distribution Box With OptiTap Adapter

Optical Fiber sub-Box 16-core Outdoor 1 sub-16 Optical Cable Distribution Box with Waterproof Adapter

192/288-core Optical Cable Splice Box Fiber Splice Box Cable Junction Box FTTH Distribution Box(192 core)

Outdoor Fiber Optic Termination Box 96 Core Wall Mounted Enclosure Box For FTTB

Wall Pole Mounting Optical Fiber Distribution Box 16F PRE Connected

About US

Product

Contact Us