Specification
| Specification | MM low loss Mutimode MT ferrule |
Standard Mutimode MT ferrule |
SM low loss Singlemode MT ferrule |
Standard Mutimode MT ferrule |
| Insertion Loss | Typitcal<0.30dB Maximum<0.5dB |
Typitcal<0.50dB Maximum<0.7dB |
Typitcal<0.30dB Maximum<0.7dB |
Typitcal<0.50dB Maximum<0.7dB |
| Return Loss | ≥20dB | ≥20dB | ≥PC45dB ≥APC30dB |
≥PC45dB ≥APC30dB |
Application
- Array trunk cables
- Array fiber to single fiber fanouts and cassettes
- High fiber density card edge access
- Optical switching interframe connections
- Datacenter Cabling
Product features
-
- Low insertion loss, excellent stability, high adaptability and flexibility.
-
- A special minimum bending insensitive radius is adopted to ensure that the communication system can run stably even when the fiber is extremely bent
-
- Can withstand tight and complex bending wiring, and signal loss can be significantly reduced.
Production Tests
We carry out end face, insert loss & return loss and 3D test to ensure the product quality is up to standard.
Packge Method
Tie the line into the PE bag, the connector head position down, product labels affixed to the middle of the PE bag. The long side of the label is parallel to the bottom edge of the PE bag, finally put it into the carton.
